Premium OEM Style 7.9 Inch Replacement Mirror with Auto Brightness
Includes mirror mount bracket that suits Ford Ranger/ Mazda BT-50
This mirror features a 7.9 inch full screen display that captures the crystal clear images from the rear view camera.
The 7.9 inch full screen automatically comes on once reverse is selected.
This monitor has an auto brightness control feature, which allows it to sense ambient light and auto adjust the monitor to optimum effect.
The brightness is different at daytime, dusk or night time. On a bright sunny day the monitor will adjust to full brightness to eliminate sun glare when reversing.
The mirror/monitor has 4 video inputs which allows you to connect up to 4 cameras to your vehicle, caravan or trailer.
To select the video input, use the hidden smart touchscreen menu controls. This automatically illuminates once touched and hides again after 10 seconds.
The mirror is designed with the following features to withstand Australian conditions:
4mm Thick glass and a high quality PC + ABS plastic housing.
Large diameter mounting bracket tube with an internal spring for stiffness and adjustability.
Features:
Mirror with 7.9 inch TFT-LCD full screen
Illuminated smart touchscreen
Auto brightness control
Auto switch when in reverse
Uses existing mirror mount on vehicle windscreen
Includes mirror mount bracket that suits most Toyota, Mitsubishi, Nissan and Holden vehicles
Use reverse mirror touchscreen for parking lines adjustment or turn Off.
Compatible with all DNA series reverse camera.
Specifications:
Aspect Ratio: 16 : 9
Resolution: 1280*370
Video System: PAL/NTSC/AHD/HD-TVI Selectable
4 Video Inputs: "Camera" to "Reverse" trigger, "Video-2" to "Trigger1", "Video-3" to "Trigger2", "Video-1" has no trigger
Operating Voltage: 12V DC
Mirror Housing Size: 213mm Wide x 83.8mm High x 49.2mm Deep
Packaging: Display box
Box Contains:
Mirror
Bracket
Remote control
Harness
Wire cover
Camera Type Selection Instructions for Rearview Mirror System
1. Power Off the System:
Turn off all power accessories connected to the rearview mirror system.
2. Enter Camera Selection Mode:
Press and hold the “Power button”, then turn on the power accessory.
You will hear a “beep”, and the “backlight will illuminate”, indicating the system is active.
Press and hold the Power button for 2 seconds to enter the Camera 1 selection menu.
3. Set Camera Type for Each Channel:
Camera 1:
Short press of the Power button to cycle through the available camera formats,then press and hold the Power button for 2 seconds to confirm and move to Camera 2 settings.
Repeat the same process for the rest cameras input.
Continue this sequence until all connected cameras (up to 4) are properly configured.
4. After setting the camera type for all 4 cameras, press and hold the Power button for 2 seconds to exit the setup menu.