| • | AB Class 4 channel amplifier - 4 / 2 ohm operational
|
| • | Designed for ultra high performance in demanding applications.
|
| • | This powerful 4 channel amplifier is designed for amplifying independent channels as well as getting the best performance possible from those power hungry subwoofers.
|
| • | General features:
|
| • | Mosfet power supply
|
| • | Power transformers: Double
|
| • | Power transistors: 8 Pairs
|
| • | Green / Red LED power/status indicator
|
| • | Low load impedance capable: 2 ohm to 8 ohm
|
| • | Power: RMS Power output at 13.8V
|
| • | At 4 ohm mono: 160W
|
| • | At 4 ohm bridged: 427W
|
| • | At�2 ohm mono: 219W
|
| • | Max power output at 13.8V
|
| • | At 4 ohm mono: 450W
|
| • | At 4 ohm bridged: 1280W
|
| • | At�2 ohm mono: 650W
|
| • | RCA inputs: Gold plated RCA sockets
|
| • | Input level: 216mV-5V
|
| • | Input Impedance: 10K ohms
|
| • | Power input terminals:
|
| • | Power Inputs: 4 Gauge gold plated screw terminals
|
| • | Remote Input: 18 Gauge gold plated screw terminal
|
| • | RCA outputs: Gold plated RCA sockets
|
| • | Line out ( pass through ) CH1 & CH2
|
| • | Speaker output terminals: Gold plated 14 gauge screw speaker terminals
|
| • | Audio controls and specifications:
|
| • | Remote control supplied for bass boost adjustment in vehicleFrequency response: 20Hz~20kHz
|
| • | Built in variable Subwoofer Crossover (LPF) 50~250Hz
|
| • | Subsonic filter: Internal 18Hz
|
| • | Bass boost frequency: 50Hz
|
| • | Bass boost level: 0~12dB
|
| • | Total harmonic distortion (THD) @ 1kHz: 0.05%
|
| • | S/N Ratio @ 1kHz: 90dB
|
| • | Power and protection specifications:
|
| • | Voltage range: 6~17VDC
|
| • | Idle current: 1.0 Amps
|
| • | Max current (4 Ohm): 67 Amps
|
| • | Max current (2 Ohm): 114 Amps
|
| • | Protection circuit: Overload, short circuit, thermal, low voltage, high voltage.
|
| • | Fuse rating: 4 x 30 Amp blade fuses
|
| • | Temperature overheat protection: 82 Degrees
|
| • | Measurements: 541mm L x 258mm W x 52mm H
|
| • | Packaging: DNA gift box |
